The PM-1 series is designed to prevent seawater from entering tanks, while allowing air or vapor from within the tank to escape when the tank is being filled, and take in air when tank is being discharged. Tank Vents are also needed for tanks in the storage mode to allow them to "breathe".

The classic inverted design (Gooseneck) offers the simplest means for your venting requirements. Corrosion resistant flame screens are also included to provide ignition protection when venting fuel oil tanks.

Full Material Traceability.

1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

Pipe Size: A

Dim: B

Dim: C

Dim: D

Dim: E

Dim: F

Dim: G

Weight

Weight w/ Flange

N/A 1.5 in N/A 4.625 in N/A 4 in N/A 4.75 in N/A 5 in N/A 1.5 in N/A 0.5 in N/A 5 lb N/A 8 lb
N/A 2 in N/A 6.125 in N/A 5 in N/A 6.375 in N/A 6 in N/A 2 in N/A 0.5 in N/A 9 lb N/A 12 lb
N/A 2.5 in N/A 6.25 in N/A 5.5 in N/A 6.625 in N/A 7 in N/A 1.875 in N/A 0.5 in N/A 10.5 lb N/A 22.5 lb
N/A 3 in N/A 7.5 in N/A 6.5 in N/A 7.938 in N/A 7.5 in N/A 2 in N/A 0.5 in N/A 15 lb N/A 22.5 lb
N/A 4 in N/A 8.875 in N/A 8 in N/A 9.313 in N/A 9 in N/A 2.5 in N/A 0.5 N/A 23 lb N/A 33.5 in
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1